Node Net Repeaters

From NodeNet
Revision as of 08:40, 18 March 2026 by Douwe (talk | contribs)
Jump to navigationJump to search

NodeNet Repeaters

Sensecap solar 1 pro

Nodes and Settings

Name Lokatie Public Key Radio Params Firmware Password Roof Policy Region Settings path_hash_mode
AMS01 Stopera 1165023ee477dbd95ffd416121ef238f4859ca33bde39ff2db98e56df4c64625 EU/UK Narrow 1.12.0 DEFAULT contact facilitair
AMS02 Oude kerk 924fcf72ae08f33ac76f045c7af26aab75cbcab680fc7c26d0f5f2c81a5cedb5 EU/UK Narrow 1.13.0 DEFAULT 't Slot
AMS03 Boomspijker 980cc4a2a5d4eaaee9b03afa08b0cb38b2c69c27e424a0dfb8589de9eac376c3 EU/UK Narrow 1.13.0 DEFAULT
AMS04 Standsbank van Lening 8161dba61546745dba7dcce530cbe8da1f92b924f5307373fc86ce2198d2d3c4 EU/UK Narrow 1.12.0 DEFAULT
AMS05 Zuiderkerk F58D41C264FB0E4C17532C38B8F0B681D305B35168EA9915F4C3B39C73E36827 EU/UK Narrow 1.13.0 DEFAULT
AMS06 Marine Terrein 869351f4fd6d6ccfbb37ee47392b26995ec08074ee419c6f27b3be32054cd1cd EU/UK Narrow 1.12.0 DEFAULT via beheer Martine terrein nl-ams 0
Waag NodeNet Waag Dak 9633d06959824a17fb292980938d8153e4b577dde884b7504a33d6f76aed7e11 EU/UK Narrow 1.13.0 DEFAULT

Installing a node

Take the node from the box and charge it fully over USB-C.

Flashing and configuring

  • Connect with USB-C to your computer and open MC flasher in Chrome.
  • Repeaters can't be configured in the app, but need their online config tool.

Note to self: we need to have an offline option as well.

When setting up take note to

  • Jot down the public key on your laptop so you can later add the repeater to your companion contact list.
  • Set preset to EU/UK Narrow.
  • Set the location of the node on the map.

Other settings

  • set tx 2
  • set agc.reset.interval 4
  • set multi.acks 1
  • set rxdelay 3
  • Auto Advert Interval (Flood): Set to 12 hours or more (up to 48 hours).
  • Auto Advert Interval (Zero Hop): Set to 0 (disabled).

Public/Private key issues

  • Public Key: Check if your auto-generated Public Key prefix (the first two characters) are unique.
  • Go to the MeshExplore Stats [1].
    • Is there already a repeater using your prefix? If no, you're good to go.
    • Is your prefix in use? Scroll down to the MeshExplore Unused Repeater Prefixes.
    • Select one you would like to use and the Meshcore Custom Key Generator site will open. You will see the prefix you selected. Click Generate Key.

Copy the public and private keys and save them. We'll finish setting up the repeater and change them at the end using the web console.

  • Name: It is helpful if your repeater gives a hint about the location, such as a landmark, neighborhood or cross streets.
  • Location: Set the Latitude and Longitude in decimal format (47.xxxx, -122.xxxx).
  • Guest and Admin Password: Use a strong password. Repeaters can be administered over the mesh from the Meshcore app.

Radio Settings

  • Repeaters and clients use the “USA/Canada (Recommended)” preset.
    • Frequency: 910.525 MHz
    • Bandwidth: 62.5 kHz
    • Spreading Factor: 7
    • Coding Rate: 5

Setting Private and Public Keys

If your auto-generated key did not have a unique prefix, you should have generated a new private and public key and saved them. Go back to the Web Flasher [2] and above the list of all the devices, on the right side, click on the Console button and connect to your device. Once you are connected you will see a command prompt:

  • At the prompt, type in set prv.key and paste in your Private Key.
  • Type in reboot.
  • After your device reboots, verify that the private key is correct by running get prv.key.

Path hash mode

  • get path.hash.mode to check current setting (should be 0).
  • Change it with set path.hash.mode 1 for 2-byte, set path.hash.mode 2 for 3-byte.

Region Settings

Should we add `nl-ams` to all repeaters?

Last checks

  • Test if you can add the node to your companion user list before you put it in a high and hard-to-reach position.
  • Make sure that the solar panel is facing south.

Current issues

  • Douwe has to learn how to do OTA updates.

Setup hardware

The setup process is nicely detailed in a booklet in the box.

---

Antenna Docs

Summary

Antennas and their qualities.

Antennas

There are several antennas.

Henk ordered these:

File:Antenna order.png
Antenna bill